For original product presentations and food presentations
This conveyor-belt system is suitable for moving product presentations and food presentations. Place your food, drinks or products on the catwalk and have them move through your restaurant, showroom or store. This way, your products are guaranteed to get attention. The conveyor belt is only 7 cm high. With its slim display belt and black side finish it’s a sleek design. The optional LED lighting gives the conveyor a futuristic appearance and will attract extra attention for your product presentation!
Presenting on a conveyor belt
The Catwalker Twin Lane’s presentation platters are Ø 14 cm. If needed, the product you wish to display mat be somewhat bigger, as long as its centre fits on the presentation platter. We also offer longer presentation platters of 35 cm, if needed, for slightly larger products like shoes.
The Catwalker Twin Lane has two presentation platters of Ø 14 cm every 18 cm. If so desired, you can fill the entire conveyor belt with two presentation platters every 18 cm. If you do, there will be about 2 cm of free space between the presentation platters.
You can also choose to have fewer presentation platters go around on the display conveyor, for example 1 presentation platter every 36 cm, for instance. This way, there will be about 20 cm of distance between the presentation platters.
Incorporating the display conveyor in your space
Determine the ideal layout of your space and draw the route of the conveyor belt in your plan. Can’t make it fit with our standard-length modules? Order one straight piece made to size. We charge slightly extra for this. Curved modules of deviating size require custom work; making a curved module to size is more complicated and therefore more expensive.
Combining the conveyor belt with furniture
The conveyor belt is only 7 cm high and does not require a complicated support structure. Simply place the Catwalker on top of your bar or table; any stable surface will do. All that’s required is a small recess in your furniture where the motor will be. You may also mount the conveyor belt flush with your furniture. This way, only the top surface will be visible!
Concept idea: have the Catwalker enter your restaurant or showroom from behind a wall.
Personal advice
Questions about this product? Feel free to contact Pre-Motion.
Rather buy a mobile conveyor belt? Check out the mobile version for sale or the rental version.
Installation and operation
Pre-Motion will deliver and install the conveyor belt at your location. When we come to install the conveyor, it’s important your furniture is ready for installation. The Catwalker can be mounted on top of your furniture or flush with its surface. Important: the furniture must be flat and mustn’t bend under the weight.
Depending on the size of the conveyor belt, there will be 1 or more motors underneath. These small motors are noiseless, so they won’t annoy people. The underside of the conveyor belt is flat, only the motor sticks out. The motor sticks out approximately 13 centimetres under the display conveyor. Make a small recess in your furniture and the motor will be invisible for your guests/visitors! Beware: Avoid completely closing in the motor, as it needs proper ventilation. Hanging it unobstructed in an empty piece of furniture will usually work fine.
Photo: underside of conveyor belt with motor
The Catwalker requires a 230 V power outlet. With the included control box the conveyor belt can be operated (start, stop and speed). This box measures 30 x 20 x 8 cm. From the control box a single cable runs to the motor(s) underneath the conveyor belt. Optional LED lighting in the sides will require an additional 230 V power outlet.
Photo: control box
Combining standard modules
Pre-Motion offers standard conveyor-belt modules. By combining straight modules and curves, you can create your own Route Return. The basic set consists of 2 end pieces with a length of 100 cm each, on which the products make a 180-degree turn. These two pieces are always required, since at the end the products go back. In between these end pieces you can add straight and curved modules as desired.
Looking for a conveyor belt for a sushi restaurant?
Sushi restaurants serve small dishes. Therefore, 90% of restaurant owners choose a 40 cm wide conveyor belt; it saves space!
Looking for a conveyor belt for product presentations?
For product presentations the 50 cm wide conveyor belt is the most popular choice; the products are generally a bit larger and get more room on the wider conveyor belt. Also when you’re serving larger dishes at your restaurant, it’s better to go for a 50-cm-wide conveyor belt.
Standard modules Catwalker Twin Lane
The Catwalker Twin Lane for permanent installation is 7 cm high, with a standard width of 40 cm. For product presentations and restaurants serving larger dishes, we also offer optional modules of 50 cm wide.
Available lengths:
- Straight parts: 50 cm, 75 cm, 100 cm, 150 cm, 200 cm and 300 cm.
Tailor-made sushi conveyor
Are you looking for a conveyor belt of deviating dimensions? At extra cost we also offer tailor-made sushi conveyor belts.
Starting at: € 4,845.-
€ 4,000 - € 7,000
